Grinders
Showing 1–12 of 26 results
-
Sale!
PYREX® 0.5 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-5X
$155.98Add to cartPYREX® 0.5 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-5X
These 0.5 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$155.98 -
Sale!
PYREX® 1 mL Glass Pestle Tissue Grinder | Corning 7724-1
$135.02Add to cartPYREX® 1 mL Glass Pestle Tissue Grinder | Corning 7724-1
These 1 mL PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.
$135.02 -
Sale!
PYREX® 1 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-1
$134.18Add to cartPYREX® 1 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-1
These 1 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$134.18 -
Sale!
PYREX® 1 mL PTFE Pestle Tissue Grinder with Steel Shaft | Corning 7724T-1
$182.51Add to cartPYREX® 1 mL PTFE Pestle Tissue Grinder with Steel Shaft | Corning 7724T-1
These 1 mL capacity PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. -Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$182.51 -
Sale!
PYREX® 15 mL Dounce Tissue Grinder with two Pestles | Corning 7722-15
$141.92Add to cartPYREX® 15 mL Dounce Tissue Grinder with two Pestles | Corning 7722-15
These hand-driven 15 mL PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Particularly useful in enzyme studies where heat build-up must be avoided.
• The internal diameter at the bottom of the unground glass tube (mortar) is .6000
• Use the large clearance A pestle for initial reduction of soft tissue. The diameter of the ground and polished end is .5950± .0005 for a nominal clearance of .005 with the tube.
• Complete the homogenization with the small clearance B pestle. The diameter of the ground and polished end is .5980± .0005 for a nominal clearance of .002 with the tube.$141.92 -
Sale!
PYREX® 15 mL Glass Pestle Tissue Grinder | Corning 7724-15
$141.50Add to cartPYREX® 15 mL Glass Pestle Tissue Grinder | Corning 7724-15
These 15 mL PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.
$141.50 -
Sale!
PYREX® 15 mL PTFE Pestle Tissue Grinder with Steel Shaft | Corning 7724T-15
$221.21Add to cartPYREX® 15 mL PTFE Pestle Tissue Grinder with Steel Shaft | Corning 7724T-15
These 15 mL capacity PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. -Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$221.21 -
Sale!
PYREX® 17 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-17
$154.84Add to cartPYREX® 17 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-17
These 17 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$154.84 -
Sale!
PYREX® 19 mL Motor-Driven Glass Pestle Tissue Grinder | Corning 7725-19
$553.97Add to cartPYREX® 19 mL Motor-Driven Glass Pestle Tissue Grinder | Corning 7725-19
These motor-driven 16 mL capacity PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet deliver a fine homogenous sample. -Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$553.97 -
Sale!
PYREX® 3 mL Glass Pestle Tissue Grinder | Corning 7724-3
$133.75Add to cartPYREX® 3 mL Glass Pestle Tissue Grinder | Corning 7724-3
These 3 mL PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.
$133.75 -
Sale!
PYREX® 3 mL Motor-Driven Glass Pestle Tissue Grinder | Corning 7725-13
$462.54Add to cartPYREX® 3 mL Motor-Driven Glass Pestle Tissue Grinder | Corning 7725-13
These motor-driven 3 mL capacity PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet deliver a fine homogenous sample. -Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$462.54 -
Sale!
PYREX® 3 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-3
$139.88Add to cartPYREX® 3 mL Potter-Elvehjem Tissue Grinder with PTFE Pestle | Corning 7725T-3
These 3 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
$139.88