Extraction Concentration Tools
Showing 1–12 of 15 results
-
Sale!
PYREX® 125 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-S
$373.67Add to cartPYREX® 125 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-S
This 125 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 34/45 outer Standard Taper joint on the top, an Allihn condenser with a 34/45 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$373.67 -
Sale!
PYREX® 1L Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-XL
$822.55Add to cartPYREX® 1L Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-XL
This 1L PYREX® extractor system consists of a Soxhlet extractor with a 29/42 inner Standard Taper joint on the bottom and a 71/60 outer Standard Taper joint on the top, an Allihn condenser with a 71/60 inner Standard Taper joint on the bottom and a flask with a 29/42 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 3840-1LFO. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$822.55 -
Sale!
PYREX® 1L Kuderna-Danish Concentrator Apparatus without Hooks | Corning 2157-1L
$358.32Add to cartPYREX® 1L Kuderna-Danish Concentrator Apparatus without Hooks | Corning 2157-1L
These 1L PYREX® Kuderna Danish Concentrators are supplied with Keck clamps instead of spring hooks. The complete apparatus consists of a 3-Ball Snyder column (with 24/40 Standard Taper joints), a 1L flask (with 24/40 Standard Taper top and 19/22 Standard Taper lower joint), and a graduated 25 mL tube with an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2 mL in 0.1 mL increments and from 3 mL on in 1.0 mL increments. All columns have venting dimples. For replacement Snyder columns, see No. 2158-3CO.
$358.32 -
Sale!
PYREX® 200 mL Soxhlet Extractor with Standard Taper Joints, Body Only | COR1-3740-L
$511.09Add to cartPYREX® 200 mL Soxhlet Extractor with Standard Taper Joints, Body Only | COR1-3740-L
These 200 mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from accidental damage by the vapor tube. The inner (bottom) standard taper joint is 24/40 and the outer (top) standard taper joint is 55/50. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$511.09 -
Sale!
PYREX® 25 mm Diameter Coarse Porosity Fritted Thimble, 85 mm Long | Corning 33950-SC
$502.60Add to cartPYREX® 25 mm Diameter Coarse Porosity Fritted Thimble, 85 mm Long | Corning 33950-SC
These 25mm diameter PYREX® coarse porosity (40 to 60 µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These short length thimbles are only 85mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware under Technical Literature.
$502.60 -
Sale!
PYREX® 250 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-M
$404.96Add to cartPYREX® 250 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-M
This 250 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 45/50 outer Standard Taper joint on the top, an Allihn condenser with a 45/50 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$404.96 -
Sale!
PYREX® 35 mm Diameter Coarse Porosity Fritted Thimble, 90 mm Long | Corning 33950-MC
$374.87Add to cartPYREX® 35 mm Diameter Coarse Porosity Fritted Thimble, 90 mm Long | Corning 33950-MC
These 35mm diameter PYREX® coarse porosity (40 to 60 µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 90mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware under Technical Literature.
$374.87 -
Sale!
PYREX® 35 mm Diameter Extra Coarse Porosity Fritted Thimble, 90 mm Long | Corning 33950-MEC
$71.38Add to cartPYREX® 35 mm Diameter Extra Coarse Porosity Fritted Thimble, 90 mm Long | Corning 33950-MEC
These 35mm diameter PYREX® extra coarse porosity (170 to 220 µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 90mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware under Technical Literature.
$71.38 -
Sale!
PYREX® 45 mm Diameter Coarse Porosity Fritted Thimble, 130 mm Long | Corning 33950-LC
$471.34Add to cartPYREX® 45 mm Diameter Coarse Porosity Fritted Thimble, 130 mm Long | Corning 33950-LC
These 45mm diameter PYREX® coarse porosity (40 to 60 µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware under Technical Literature.
$471.34 -
Sale!
PYREX® 45 mm Diameter Extra Coarse Porosity Fritted Thimble, 130 mm Long | Corning 33950-LEC
$90.70Add to cartPYREX® 45 mm Diameter Extra Coarse Porosity Fritted Thimble, 130 mm Long | Corning 33950-LEC
LongThese 45mm diameter PYREX® extra coarse porosity (170 to 220 µm) fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware under Technical Literature.
$90.70 -
Sale!
PYREX® 50 mL Soxhlet Extractor with Standard Taper Joints, Body Only | COR1-3740-S
$373.15Add to cartPYREX® 50 mL Soxhlet Extractor with Standard Taper Joints, Body Only | COR1-3740-S
These 50 mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from accidental damage by the vapor tube. The unit has a 24/40 inner Standard Taper joint and a 34/45 outer Standard Taper joints at the top and bottom. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$373.15 -
Sale!
PYREX® 500 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-L
$455.40Add to cartPYREX® 500 mL Extractor System with Soxhlet Extractor and Allihn Condenser | COR1-3840-L
This 500 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 55/50 outer Standard Taper joint on the top, an Allihn condenser with a 55/50 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100. For glass extraction thimbles with fritted discs that can be used in these units in place of paper thimbles, see No. 33950.
$455.40