Condensers
Showing 1–12 of 21 results
-
Sale!
PYREX® 10 Bulb Allihn Condensers, Drip Tip, with 29/42 Standard Taper Outer and Inner Joints | Corning 2480-600
$253.85Add to cartPYREX® 10 Bulb Allihn Condensers, Drip Tip, with 29/42 Standard Taper Outer and Inner Joints | Corning 2480-600
- These 24mm diameter Netwell inserts have 74µm polyester mesh bottoms attached to polystyrene inserts
- They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface
- Handy carriers are available for immunocytochemical staining of tissue slices (See accessories below)
- Provides coarse filtration of tissue homogenates, cell suspensions and microcarriers
- Supplied sterile and pre-loaded in 6-well microplates
- 24mm Netwell inserts fit in Corning 50 mL plastic centrifuge tubes
$253.85 -
Sale!
PYREX® 200 mm Graham Condensers with Top and Bottom 19/38 Standard Taper Joints | Corning 2560-200
$196.51Add to cartPYREX® 200 mm Graham Condensers with Top and Bottom 19/38 Standard Taper Joints | Corning 2560-200
- Secure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)
- Nonpyrogenic tested to less than 0.1 EU/ mL
- Volumetric graduations and writing patch
- Growth area and volume are nominal
$196.51 -
Sale!
PYREX® 3 Bulb Allihn Condensers, Drip Tip, with 19/38 Standard Taper Outer and Inner Joints | Corning 2480-200
$187.43Add to cartPYREX® 3 Bulb Allihn Condensers, Drip Tip, with 19/38 Standard Taper Outer and Inner Joints | Corning 2480-200
• Ultra-Low Attachment Plates feature a covalently bound hydrogel layer that effectively inhibits cellular attachment
• Surface minimizes protein absorption, enzyme activation, and cellular activation
• Surface is non-cytotoxic, biologically inert, and nondegradable
• Nonreversible lids with condensation rings to reduce contamination
• Individual alphanumerical codes for well identification
• Uniform footprint for ease in stacking
• Sterilized by gamma irradiation and certified nonpyrogenic$187.43 -
Sale!
PYREX® 300 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-300
$1,131.82Add to cartPYREX® 300 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-300
These PYREX® Graham condensers have a high surface area per unit length of the 300mm long jacket with a 24/40 Standard Taper outer joint at the top and a 24/40 Standard Taper inner joint at the bottom with a drip tip. They are primarily used in vacuum distillations. Condenser tubulations are approximately 10mm O.D.
$1,131.82 -
Sale!
PYREX® 300 mm Liebig Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2400-300
$513.66Add to cartPYREX® 300 mm Liebig Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2400-300
These PYREX® Liebig condensers have a 300mm long condenser jacket with a 24/40 Standard Taper outer joint at the top and a 24/40 Standard Taper inner joint at the bottom with a drip tip. They are general purpose condensers that are suitable for use in vacuum distillations. Condenser tubulations are approximately 10mm O.D.
$513.66 -
Sale!
PYREX® 300 mm West Condenser, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2800-300
$436.00Add to cartPYREX® 300 mm West Condenser, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2800-300
These PYREX West condensers are designed with a 190 mm long jacket that has a Standard Taper top joint. The bottom has Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tabulation O.D. is approximately 10mm.
Cat No. 2705-19 is a replacement part for organic chemistry kits (Cat. Nos. 6949 through 6949K).
$436.00 -
Sale!
PYREX® 400 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-400
$897.77Add to cartPYREX® 400 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-400
- Secure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)
- Nonpyrogenic tested to less than 0.1 EU/ mL
- Volumetric graduations and writing patch
- Growth area and volume are nominal
$897.77 -
Sale!
PYREX® 400 mm Liebig Condenser with 24/40 Standard Taper Inner Joint with Drip Tip | Corning 2360-400
$529.98Add to cartPYREX® 400 mm Liebig Condenser with 24/40 Standard Taper Inner Joint with Drip Tip | Corning 2360-400
This PYREX® general purpose condenser has a 24/40 Standard Taper inner joint at the bottom with a drip tip. Although the condensing area per unit length of the 400mm long jacket is low, the large capacity water jacket gives efficient cooling. They can be used for either distillation or extraction. Condenser tubulations are approximately 10mm O.D.
$529.98 -
Sale!
PYREX® 5 Bulb Allihn Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2480-300
$957.51Add to cartPYREX® 5 Bulb Allihn Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2480-300
These widely used 5 bulb PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations.. They have an outer 24/40 Standard Taper joint at the top and an inner 24/40 Standard Taper joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm.
$957.51 -
Sale!
PYREX® 500 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-500
$958.69Add to cartPYREX® 500 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints | Corning 2560-500
- Secure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)
- Nonpyrogenic tested to less than 0.1 EU/ mL
- Volumetric graduations and writing patch
- Growth area and volume are nominal
$958.69 -
Sale!
PYREX® 500 mm Liebig Condenser with 24/40 Standard Taper Inner Joint with Drip Tip | Corning 2360-500
$165.33Add to cartPYREX® 500 mm Liebig Condenser with 24/40 Standard Taper Inner Joint with Drip Tip | Corning 2360-500
This PYREX® general purpose condenser has a 24/40 Standard Taper inner joint at the bottom with a drip tip. Although the condensing area per unit length of the 500mm long jacket is low, the large capacity water jacket gives efficient cooling. They can be used for either distillation or extraction. Condenser tubulations are approximately 10mm O.D.
$165.33 -
Sale!
PYREX® 6 Bulb Allihn Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2480-400
$1,120.36Add to cartPYREX® 6 Bulb Allihn Condensers, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints | Corning 2480-400
- These 15mm diameter Netwell inserts have 74µm polyester mesh bottoms attached to polystyrene inserts
- They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface
- Handy carriers are available for immunocytochemical staining of tissue slices (See accessories below)
- Provides coarse filtration of tissue homogenates, cell suspensions and microcarriers
- Supplied sterile and pre-loaded in 12-well microplates
$1,120.36