Culture
Showing 1–12 of 48 results
-
Sale!
Corning® Corning® ProCulture 12 mm Oxygen Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-108
$139.59Add to cartCorning® Corning® ProCulture 12 mm Oxygen Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-108
Sidearm fitting for inserting 12mm diameter probes used to secure O2 sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs considerably below those of traditional Bioreactor vessels with expensive stainless steel headplates. This provides a cost-effective way of enhancing cell culture productivity. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. The sensors are held in place by modified polyphenylene oxide thermoplastic nuts with Viton O-rings. The fittings are completely autoclavable.
$139.59 -
Sale!
Corning® Corning® ProCulture 12 mm pH Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-110
$139.59Add to cartCorning® Corning® ProCulture 12 mm pH Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-110
Sidearm fitting for inserting 12mm diameter probes used to secure pH sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs considerably below those of traditional Bioreactor vessels with expensive stainless steel headplates. This provides a cost-effective way of enhancing cell culture productivity. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. The sensors are held in place by modified polyphenylene oxide thermoplastic nuts with Viton O-rings. The fittings are completely autoclavable.
$139.59 -
Sale!
Corning® Corning® ProCulture 12 mm Temperature Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-128
$139.59Add to cartCorning® Corning® ProCulture 12 mm Temperature Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-128
Sidearm fitting for inserting 12mm diameter probes used to secure temperature sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs considerably below those of traditional Bioreactor vessels with expensive stainless steel headplates. This provides a cost-effective way of enhancing cell culture productivity. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. The sensors are held in place by modified polyphenylene oxide thermoplastic nuts with Viton O-rings. The fittings are completely autoclavable.
$139.59 -
Sale!
Corning® Corning® ProCulture 18 mm pH, Oxygen or Temperature Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-172
$173.51Add to cartCorning® Corning® ProCulture 18 mm pH, Oxygen or Temperature Probe Insertion Fitting for Vertical Sidearm Flasks | Corning 4519-172
Sidearm fitting for inserting 18mm diameter probes used to secure pH, O2 or temperature sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs considerably below those of traditional Bioreactor vessels with expensive stainless steel headplates. This provides a cost-effective way of enhancing cell culture productivity. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. The sensors are held in place by modified polyphenylene oxide thermoplastic nuts with fluorocarbon O-ring. The fittings are completely autoclavable.
$173.51 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 1L Angled Sidearm Flasks | COR1-4519-173
$285.02Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 1L Angled Sidearm Flasks | COR1-4519-173
Fits 1L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Dual angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene sealing cap. Two 316 stainless steel tubes (1/8 OD), which extend to the bottom of the flask, are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable.
$285.02 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 500 mL Angled Sidearm Flasks | COR1-4519-174
$281.52Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 500 mL Angled Sidearm Flasks | COR1-4519-174
Fits 500 mL Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Dual angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene sealing cap. Two 316 stainless steel tubes (1/8 OD), which extend to the bottom of the flask, are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable.
$281.52 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 8L Angled Sidearm Flasks | COR1-4519-121
$285.00Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 8L Angled Sidearm Flasks | COR1-4519-121
Fits 8L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Dual angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene sealing cap. Two 316 stainless steel tubes (1/8 OD), which extend to the bottom of the flask, are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable.
$285.00 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 15L Angled Sidearm Flasks | COR1-4519-165
$272.08Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 15L Angled Sidearm Flasks | COR1-4519-165
Fits 8L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium directly, or the headspace above the cell culture medium, with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. One 316 stainless steel tube extends to the bottom of the flask; the other is a shorter 6” length. Both 1/4
$272.08 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 1L Angled Sidearm Flasks | COR1-4519-162
$254.39Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 1L Angled Sidearm Flasks | COR1-4519-162
Fits 1L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium directly, or the headspace above the cell culture medium, with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. One 316 stainless steel tube extends to the bottom of the flask; the other is a shorter 6” length. Both 1/4
$254.39 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 3L Angled Sidearm Flasks | COR1-4519-163
$257.77Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 3L Angled Sidearm Flasks | COR1-4519-163
Fits 3L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium directly, or the headspace above the cell culture medium, with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. One 316 stainless steel tube extends to the bottom of the flask; the other is a shorter 6” length. Both 1/4
$257.77 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 6L Angled Sidearm Flasks | COR1-4519-164
$264.51Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 6L Angled Sidearm Flasks | COR1-4519-164
Fits 6L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium directly, or the headspace above the cell culture medium, with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. One 316 stainless steel tube extends to the bottom of the flask; the other is a shorter 6” length. Both 1/4
$264.51 -
Sale!
Corning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 8L Angled Sidearm Flasks | COR1-4519-171
$307.84Add to cartCorning® Corning® ProCulture Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 8L Angled Sidearm Flasks | COR1-4519-171
Fits 15L Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Combination angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell culture medium directly, or the headspace above the cell culture medium, with gases to enhance cell production. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a polypropylene-sealing cap. One 316 stainless steel tube extends to the bottom of the flask; the other is a shorter 6” length. Both 1/4
$307.84