Glass
Showing 1–12 of 122 results
-
Sale!
PYREX® 100 mL Round Media Storage Bottles, with GL45 PBT Plug Seal High Temperature Cap | COR1-1395-100HTC
$179.80Add to cartPYREX® 100 mL Round Media Storage Bottles, with GL45 PBT Plug Seal High Temperature Cap | COR1-1395-100HTC
These heavy duty 100 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.
Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.
A wide range of optional caps are available for these bottles:- Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification
- Vented membrane cap with 0.22 µm PTFE hydrophobic membrane
- PBT caps with silicone septa for syringe sampling or introduction of reagents
$179.80 -
Sale!
PYREX® 100 mL Round Media Storage Bottles, with GL45 Screw Cap | COR1-1395-100
$91.70Add to cartPYREX® 100 mL Round Media Storage Bottles, with GL45 Screw Cap | COR1-1395-100
These heavy duty 100 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.
Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.
A wide range of optional caps are available for these bottles:- Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification.
- Vented membrane cap with 0.22 µm PTFE hydrophobic membrane.
- Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C).
- PBT caps with silicone septa for syringe sampling or introduction of reagents.
$91.70 -
Sale!
PYREX® 100 mL Square Glass Media Storage Bottles, with GL32 Screw Cap | COR1-1396-100
$111.61Add to cartPYREX® 100 mL Square Glass Media Storage Bottles, with GL32 Screw Cap | COR1-1396-100
These heavy duty 100 mL square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, one-piece autoclavable orange GL32 threaded polypropylene plug seal cap and a drip-free pouring ring.
Caution: Square bottles should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.
A wide range of optional caps are available for these bottles:- Polypropylene colored caps for ease of sorting and identification.
- Vented membrane cap with 0.22 µm PTFE hydrophobic membrane.
- PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C).
- PBT caps with silicone septa for syringe sampling or introduction of reagents.
$111.61 -
Sale!
PYREX® 10L Round Media Storage Bottles, with GL45 Screw Cap | COR1-1395-10L
$211.22Add to cartPYREX® 10L Round Media Storage Bottles, with GL45 Screw Cap | COR1-1395-10L
These heavy duty 10L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. Bottles have permanent white enamel graduations and marking spots.
Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. A vented cap is NOT recommended for use on the 10L 1395 bottle for venting during autoclaving.
A wide range of optional caps are available for these bottles:- Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification.
- Vented membrane cap with 0.22 µm PTFE hydrophobic membrane.
- Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C).
- PBT caps with silicone septa for syringe sampling or introduction of reagents.
$211.22 -
Sale!
PYREX® 12 mL Standard Weighing Bottle with Short Length External 29/12 Standard Taper Joint | COR1-1686-2540
$428.15Add to cartPYREX® 12 mL Standard Weighing Bottle with Short Length External 29/12 Standard Taper Joint | COR1-1686-2540
These 12 mL PYREX® standard weighing bottles have an external 29/12 Standard Taper joint style opening. The closure style cap fits over the externally ground body.
$428.15 -
Sale!
PYREX® 12 mL Tall Weighing Bottle with Short Length 14/10 Standard Taper Joint | COR1-1680-1580
$108.47Add to cartPYREX® 12 mL Tall Weighing Bottle with Short Length 14/10 Standard Taper Joint | COR1-1680-1580
These 12 mL PYREX® tall form weighing bottles have a 14/10 Standard Taper joint style opening that accepts a closed bottom, hollow pennyhead style stopper.
$108.47 -
Sale!
PYREX® 12 mL Tall Weighing Bottle with Short Length 24/12 Standard Taper Joint | COR1-1680-2540
$433.51Add to cartPYREX® 12 mL Tall Weighing Bottle with Short Length 24/12 Standard Taper Joint | COR1-1680-2540
These 12 mL PYREX® tall form weighing bottles have a 24/12 Standard Taper joint style opening that accepts a closed bottom, hollow pennyhead style stopper.
$433.51 -
Sale!
PYREX® 125 mL Gas Washing Bottle with Coarse Fritted Cylinder | COR1-31770-125C
$234.72Add to cartPYREX® 125 mL Gas Washing Bottle with Coarse Fritted Cylinder | COR1-31770-125C
These 125 mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 29/42 Standard Taper stopper is used to seal the top to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium. After bubbling through the medium, the gas is removed via the sidearm of the bottle stopper. The Standard Taper stopper incorporates a tube with a12mm diameter coarse fritted cylinder as the distributor. This coarse frit has a nominal pore distribution of 40 to 60 µm. Please check the Guide to Selecting and Using Fritted Glassware in our Technical Information Listing for additional information on fritted ware.
$234.72 -
Sale!
PYREX® 125 mL Gas Washing Bottle with Coarse Fritted Disc | COR1-31760-125C
$264.49Add to cartPYREX® 125 mL Gas Washing Bottle with Coarse Fritted Disc | COR1-31760-125C
These 125 mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium. After bubbling through the medium, the gas is removed via the sidearm of the bottle stopper. The Standard Taper stopper incorporates a tube with a 20mm diameter coarse fritted disc as the distributor. The fritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption. This coarse frit has a nominal pore distribution of 40 to 60 µm. Please check the Guide to Selecting and Using Fritted Glassware in our Technical Information Listing for additional information on fritted ware.
$264.49 -
Sale!
PYREX® 125 mL Gas Washing Bottle with Extra Coarse Fritted Cylinder | COR1-31770-125EC
$215.97Add to cartPYREX® 125 mL Gas Washing Bottle with Extra Coarse Fritted Cylinder | COR1-31770-125EC
These 125 mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 29/42 Standard Taper stopper is used to seal the top to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium. After bubbling through the medium, the gas is removed via the sidearm of the bottle stopper. The Standard Taper stopper incorporates a tube with a 12mm diameter extra coarse fritted cylinder as the distributor. This extra coarse frit has a nominal pore distribution of 170 to 220 µm. Please check the Guide to Selecting and
$215.97 -
Sale!
PYREX® 125 mL Gas Washing Bottle with Extra Coarse Fritted Disc | COR1-31760-125EC
$270.54Add to cartPYREX® 125 mL Gas Washing Bottle with Extra Coarse Fritted Disc | COR1-31760-125EC
These 125 mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium. After bubbling through the medium, the gas is removed via the sidearm of the bottle stopper. The Standard Taper stopper incorporates a tube with a 20mm diameter extra coarse fritted disc as the distributor. The fritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption. This extra coarse frit has a nominal pore distribution of 170 to 220 µm. Please check the Guide to Selecting and Using Fritted Glassware in our Technical Information Listing for additional information on fritted ware.
$270.54 -
Sale!
PYREX® 125 mL Gas Washing Bottle with Plain Tip Tube | COR1-1760-125
$169.93Add to cartPYREX® 125 mL Gas Washing Bottle with Plain Tip Tube | COR1-1760-125
The standard taper stopper incorporates a plain tip tube as the distributor. These bottles have a large hexagonal base for stability. Tubulations are 18 mm O.D.
$169.93