• 10 µm thick transparent polyester membrane
• Treated for optimal cell attachment
• Packaged 12 inserts in a 24 well plate, 4 plates per case
• Excellent visibility under phase contrast microscopy
• Sterilized by gamma radiation
(This is the suggested replacement for 6946-1L)
These 1L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-500CO: for replacement bottoms, see No. 6947-1LBO.
(This is the suggested replacement for 6946-2L)
These 2L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for replacement bottoms, see No. 6947-2LBO
(This is the suggested replacement for 6946-3L)
These 3L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for replacement bottoms, see No. 6947-3LBO
(This is the suggested replacement for 6946-4L)
These 4L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for replacement bottoms, see No. 6947-4LBO.
PYREX® 500 mL Resin Reaction Kettles with Covers, Four-Neck Standard Taper Joints | Corning 6947-500
(This is the suggested replacement for 6946-500)
These 500 mL PYREX® kettles have covers with four openings to accommodate 24/40 Standard Taper joints. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-500CO: for replacement bottoms, see No. 6947-500BO.
(This is the suggested replacement for 2735-224, 2935-224 and 2955-224)
These 22x40mm rectangular No.1 Corning® cover glasses are made from borosilicate glass and are 0.13 to 0.16mm thick.
(This is the suggested replacement for 2735-225, 2935-225 and 2955-225)
These 22x50mm rectangular No.1 Corning® cover glasses are made from borosilicate glass and are 0.13 to 0.16mm thick.
(This is the suggested replacement for 2735-243, 2935-243 and 2955-243)
These 24x30mm rectangular No.1 Corning® cover glasses are made from borosilicate glass and are 0.13 to 0.16mm thick.
(This is the suggested replacement for 2735-244, 2935-244 and 2955-244)
These 24x40mm rectangular No.1 Corning® cover glasses are made from borosilicate glass and are 0.13 to 0.16mm thick.
(This is the suggested replacement for 2735-245, 2935-225 and 2955-245)
These 24x50mm rectangular No.1 Corning® cover glasses are made from borosilicate and are 0.13 to 0.16mm thick.
(This is the suggested replacement for 2735-246, 2935-246 and 2955-246)
These 24x60mm rectangular No.1 Corning® cover glasses are made from borosilicate glass and are 0.13 to 0.16mm thick.
Cap assembly for small biorecator with various fitting arrangements
Cap assembly for small biorecator with various fitting arrangements
Cap assembly for small biorecator with various fitting arrangements
Corning’s special, optically clear, water-white, borosilicate cover glass is resistant to surface attach or weathering and will remain clear for extended periods of time. Packed one ounce per pack and 10 packs per case.
The thickness of No. 1 rectangles is 0.12 mm to 0.16 mm.
The innovative PYREX brand jacketed Kuderna-Danish concentrator tube circulates hot water through the jacket to boil the solvent during extraction/concentration. The bottom portion of the tube is never heated, so samples will not boil dry. The concentration automatically stops when the solvent sinks below the jacket. Lab technician time is saved by eliminating the need to watch evaporations closely to avoid boiling dry. With serrated tubulations or screw thread connections for fast set up and tear down.
The innovative PYREX brand jacketed Kuderna-Danish concentrator tube circulates hot water through the jacket to boil the solvent during extraction/concentration. The bottom portion of the tube is never heated, so samples will not boil dry. The concentration automatically stops when the solvent sinks below the jacket. Lab technician time is saved by eliminating the need to watch evaporations closely to avoid boiling dry. With serrated tubulations or screw thread connections for fast set up and tear down.
These 1 x 5/16 inch (2.54 x 0.97cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Scholar(tm) PC-171 stirrers.
These 3 x 3/4 inch (7.62 x 1.91cm) Corning® magnetic stir bars are Polytetrafluorethylene (PTFE)-coated for increased chemical resistance. Ideal for use with Corning PC-611 stirrers.